How to Build a Hothouse

 

How to Build a Small Hothouse - Cutting Glass

Glass Cutting Needs Precision

The average handyman rarely has command of a diamond cutter but a very good little wheel cutter can be bought for a couple dollars. Points to note are that the tool should, be put away in its box to avoid rust and should not be tested by running the wheel across the hand. Almost any thickness of glass can be cut with one of these wheels. Use a drop of turps and make a firm smooth cut with the wheel kept true and vertical by means of a straight-edge. A single stroke carried through from edge to edge should be sufficient. Do not attempt the same cut twice. The cutting should of course be done on a perfectly level surface, preferably covered with a cloth or newspaper;. When the cut has been made lift the sheet and tap it gently on the underside to complete the break.

Next Page >

How to Build a Hothouse

Design Features
Roof Ventilation
Construction
Foundations
Roof
Roof 2
Heating System
Glass Cutting
Materials List
 
 
 
Feel free to use these free plans so long as you link to our site. Add Links Here
Note:
How to Build a Hothouse is supported by advertising so there is absolutely no spyware or malware.
 How to Build a Greenhouse How to Build a Shed